|
|
| Sale 10 % Off all Cables Use code 6000 at the Checkout! |
| RapidRun™ >> HDMI & DVI Base Cable >> HDMI & DVI Flying Leads |
|
| Rapid Run HDMI & DVI Wall Plates - Works with Digital Base Cable |
|
| The Rapid Run complete solution requires Flying Leads or Wall Plates on either end of the Base Cable. So for each cable you will need 2 Flying Leads, or 2 Wall Plates or 1 Wall Plate and 1 Flying Lead. |
|
 |
|
|
| RapidRun™ Digital HDMI Passive Wall Plate - High Speed |
Use on either end of the Digital Runner to create a High Speed HDMI system up to 35 feet, or on the source end of the Digital Runner in an active system
up to 100 feet
Compatible with Digital Runners (Red)
Supports HDMI high resolution video
Compatible with Leviton Decora® brand cover plates
Passive Wall Plates are used on either end of Runner cables up to 25 feet and are used on the display end of Runner cables from 35 feet up to 65 feet |
|
|
|
|
|
| RapidRun™ Digital HDMI Active Wall Plate |
Note: This version of RapidRun Digital may not support the HDMI™ High Speed Specification. If both the source device and the display support the High Speed rating you may experience difficulty in supporting 1080p resolutions. If you need to meet this specification refer to part number 42224.
Compatible with Digital Runners (Red)
Supports HDMI high resolution video
Compatible with Leviton Decora® brand cover plates
Active Wall Plates are used on the source end of the Digital Runner on systems 35 feet or longer
Note: When using the Digital Runner at lengths from 35 feet to 100 feet, an Active Break-Away is required at the source end. Break-Away terminations are available in either Flying Leads or Wall Plates and are also available in different lengths and colors to meet the requirements of the installation. |
|
|
 |
|
|
| RapidRun™ Digital HDMI Active Powered Wall Plate - High Speed |
Use on display end of the Digital Runner to create an HDMI system
from 75 feet up to 100 feet
Compatible with Digital Runners (Red)
Supports HDMI high resolution video up to 1080p
When using the Digital Runner at lengths from 75 feet to 100 feet, an Active Powered Wall Plate is required only at the display end.
Recommend use with SonicWave™ HDMI cables limited to 2 meters (6 feet) or less in length, or cables manufactured using 28 AWG or larger conductors |
White
42224
| $179.99 |
Ivory
42226
| $179.99 |
Black
42227
| $179.99 |
 |
|
|
|
|
 |
|
|
| RapidRun™ Digital DVI-D Passive Wall Plate |
Use on either end of the Digital Runner to create a DVI-D system up to 25 feet, or on the display end of the Digital Runner in an active system up to 65 feet.
Compatible with Digital Runners (Red)
Supports DVI-D high resolution video up to 1080p
Passive Wall Plates are used on either end of Runner cables up to 25 feet and are used on the display end of Runner cables from 35 feet up to 65 feet
|
White
42425
| $49.99 |
Ivory
42426
| $49.99 |
Black
42225
| $49.99 |
|
|
|
|
|
|
|
|
| RapidRun™ Digital DVI-D Active Wall Plate |
Ihen using the Digital Runner at lengths from 35 feet to 100 feet, an Active Break-Away is required at the source end.
Compatible with Digital Runners (Red)
Supports DVI-D high resolution video up to 1080p
Compatible with Leviton Decora® brand cover plates
Active Wall Plates are used on the source end of the Digital Runner on systems 35 feet or longer.
The DVI-D Active Wall Plate is the perfect complement for the Digital Runner when a clean, finished look is required. It is most commonly used when connecting a PC to a monitor or projector when the source is 35 feet or more away from the display. |
White
40857
| $129.99 |
Ivory
42197
| $129.99 |
Black
42198
| $129.99 |
|
|
|
|
|
| RapidRun™ >> HDMI & DVI Base Cable >> HDMI & DVI Flying Leads |
|
| |
|
|
View whats in your cart
 |
