All DMX series cables are quality made and tested in the U.S.A.
Two Pair 22 AWG Inner Conductors
90% Braided Shield & 100% Foil Shielded, 22 AWG Drain Wire
Flexible High Temperature Rugged Black PVC Jacket
120 Ohm Impedance, UL Recognized CM or AWM 2919 30V 80 deg. C
Hand Soldered with Neutrik XLR Connectors

  •  Flexible High Temperature Rugged Black Indoor/Outdoor Polyurethane Jacket - Gas, Oil, & UV Resistant
  •  Conductors: (4) 22 AWG stranded (19/34) tinned copper conductors, twisted into (2) pairs.
  •  90% Braided Shield & 100% Foil Shielded
  •  Diameter over insulation: 0.049”
  •  Insulation: 9 mils minimum average of HDPE
  •  Hand Soldered with Neutrik XLR Connectors
  •  Quality Made & Tested in the U.S.A.  
  •  Nominal jacket O.D.: 0.245” +/- 0.005”
  •  Operating Temperature: Plus 80°C, Minus 20°C
  •  Conductivity: 15.5 Ohm (max.) per 1,000 ft. @ 25°C
  •  Capacitance: 23 pf/ft. nom. conductor to conductor
     37 pf/ft. nom. conductor to shield

"The X-HD Series is a "Heavy duty"& XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard.

 •  "Heavy duty" cable connector for outdoor use
 •  All metal design
 •  NC*FX-HD mates with NC*MPR-HD chassis connector and NC*MX-HD cable connector
 •  Dust and water protected according IP 65 in mated condition
 •  Gold contacts
 •  Chuck type strain relief system for secure clamping of cables
 •  Boot with rubber gland gives high protection against bending stresses
 •  Dust and water protected according IP 65 in mated condition